Raytec VARIO2 Extreme, Руководство пользователя

Страница: 32 / 33

23
- In extreme sunlight conditions, distance between remote and unit may
need to be reduced
- Programming may be disabled. Enter PIN to retrieve control or RESET
illuminator using one of the two RESET modes.
- Battery failure. Check battery on remote (CR2025). Test 3 volt battery,
replace if necessary. Ensure battery has clean contacts.
- Remote failure. Test with new remote
Step 4: Call Raytec for further assistance
Note down:
• Model and serial number of illuminator
• Camera make and model
• Camera Lens make and model
If the Raytec illuminator or remote control is still not delivering the required
performance, please contact us for further assistance:
UK / Europe Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
(Note : The light source (LEDs) of this Illuminator is not replaceable. When the
unit reaches its end of life the whole Illuminator shall be disposed of and re-
cycled where possible.)
Raytec Warranty
Please register your Raytec LED Illuminator(s) for its 5 year warranty by
visiting
www.rayteccctv.com/products/warranty-card