Raytec PULSESTAR VTR4, Руководство по установке

Страница: 32 / 38

28
CH 1, MD 1, S 100.0 DL 10us, PU 1.000ms,
RT 1.020ms, IP1,FL0, CS0.000A, RA24V
CH 2, MD 1, S 100.0 DL 10us, PU 1.000ms,
RT 1.020ms, IP1,FL0, CS0.000A, RA36V
Where the numeric values are:
Channel number. Channel 2 refers to a trigger
output.
MD
Mode: 1 = pulse, 2 = switched.
S
Brightness setting as a percentage.
DL
Pulse delay.
PU
Pulse width.
RT
Retrigger delay.
IP FL
These values are unused.
CS RA
ST0
Reports the general settings. Typical output is:
TM 1, TP 20.00ms
Where:
TM
= Internal trigger: 0 = off, 1 = on
TP
= Internal trigger period
STc
Reports settings for a single channel.
c = 1 to select light strobe output
c = 2 to select a trigger output signal
Simulate an Input Trigger
TR1
Simulates a trigger pulse. If the channel is in pulse mode it emits a single
pulse.
CH