RayTalk RA-5n5, Руководство пользователя

Страница: 109 / 163

User’s Manual
RA-5n5 Wireless Hotspot Gateway
ENGLISH
104
11.2.1 E-Mail
Configure Notification, go to: Status >> E-mail & SYSLOG .
y
Notification E-mail Settings:
¾
Receiver Email Address (es): Up to 3 e-mail address can be set up to receive the notification.
These are the receiver’s e-mail addresses. There are four kinds of notification to selection --
Monitor IP Report, Users Log, On-demand Users Log and Session Log, and check which type of
notification to be sent.
¾
Interval: The time interval to send the e-mail report.
¾
SMTP Setting Test: To test the settings immediately.
¾
Sender Email Address: The e-mail address of the administrator in charge of the monitoring.
This will show up as the sender’s e-mail.
¾
SMTP Server: The IP address of the sender’s SMTP server.
¾
SMTP Auth Method: The system provides four authentication methods, Plain , Login ,
CRAM-MD5 and NTLMv1 , or “None” to use none of the above. Depending on which
authentication method selected, enter the Account Name , Password and Domain .
o
NTLMv1 is not currently available for general use.
o
Plain and CRAM-MD5 are standardized authentication mechanisms while Login and
NTLMv1 are Microsoft proprietary mechanisms. Only Plain and Login can use the
UNIX login password. Netscape uses Plain . Outlook and Outlook express use Login as
default, although they can be set to use NTLMv1 .
o
Pegasus uses CRAM-MD5 or Login but which method to be used can not be
configured.