Raysharp D6004, Руководство пользователя

Страница: 10 / 30

User Manual
7
Note
：
If a camera channel is set to OFF, it will not be recorded (Refer to 6.4 Record Setup)
5.4
Record Setup
5.5
Record Frame Rate
Press [ ▲ , ▼ , ◄◄ or ►► ] button to select a channel, and then press [
SEL
] to increase the
value or press [
■
STOP
] to reduce the value.
Note
: Higher frame rate shows smoother images, but requires more hard drive space.
5.6
Video Quality
5.7
Record Schedule
Setting the Record Schedule allows you to customize the type of recording depending on the
The total frame rate is 50fps (PAL) or
60fps (NTSC). You can set the frame rate for the
channel which you select to record. If the sum of
the frame rate you select for all cameras is more
than 50fps (PAL)/60fps(NTSC), the DVR will
automatically adjust the largest frame rate value
to a smaller value.
Video Quality has 4 different settings:
Highest, High, Normal and Low .
The higher the video quality, the better
quality of images, however higher quality
images require more hard drive space.
Press
[
SEL
]
to change the quality setting.
Record Setup allows you to set up recording
channels.
Press [ ▲ , ▼ , or ] button to select a
channel, and then press [
SEL
] to modify the setting
to
ON
or
OFF
.
If a channel is disabled in Camera Setup, it will
not record and the DVR will display “NOCAM” on
screen.
MAIN MENU
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY NORMAL
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
LANGUAGE ENGLISH
VIDEO BACKUP
RESET MENU
( )MOVE (SEL)SELECT (MENU)EXIT
1 ON 2 NOCAM
RECORD SETUP
3 ON 4 ON
( )MOVE (SEL) SELECT (MENU)EXIT
1 3FPS 2 5FPS
RECORD FRAMERATE
TOTAL 36FPS
3 25FPS 4 3FPS
( )MOVE (SEL) + (
■
)- (MENU)EXIT