Raymarine S1 Tiller Pilot, Руководство по эксплуатации

Страница: 39 / 58

Chapter 2: Advanced operation 29
NEXT WPT?
Waypoint advance alarm
The SmartPilot activates the Waypoint Advance alarm whenever
the target waypoint number changes. This occurs when:
• you select automatic acquisition by pressing
track
from Auto
• you request waypoint advance by pressing
track
for 1 second
in Track mode (with SeaTalk navigators only)
• the boat arrives at the target waypoint and the navigator
accepts the next waypoint
• you activate the Man Overboard (MOB) function in Track
mode
When the alarm sounds, the pilot continues on its current heading
but displays:
• the bearing to the next waypoint
• the direction the boat will turn to take up that bearing
Responding to a Waypoint Advance alarm
To respond to a Waypoint Advance alarm:
• check that it is safe to turn onto the new track, then press
track
to accept the waypoint advance
• alternatively, you can cancel the alarm without accepting the
waypoint advance by pressing:
standby
to return to hand
steering, or
auto
to return to Auto mode.
Note: Waypoint advance only operates if the Smartpilot is receiv
ing valid bearing to waypoint and waypoint number information.
OFFCOURSE
(PT or Stb)
Off course alarm
When the vessel has been off course from the locked heading for
longer than 20 seconds.
• PT = Deviation to port
• Stb = Deviation to starboard
You can adjust this specified alarm angle in Dealer setup, see your
Commissioning guide for details.
If this happens frequently you should check sail balance and also
review autopilot performance. Seepage 9.
SHALLOW
Shallow alarm
The SmartPilot activates the Shallow alarm if it receives a shallow
depth alarm via SeaTalk:
• press
standby
or
disp
to cancel the alarm
WINDSHIFT
Large wind shift warning
Indicates a change in the apparent wind angle of more than 15º.
See page 25.
Message Description and possible actions
81283_1.book Page 29 Monday, October 2, 2006 2:03 PM