Raymarine S1 Tiller Pilot, Руководство по эксплуатации

Страница: 24 / 58

14 S1 Wheel and Tiller Pilots Operating Guide
1.6 Display lighting & contrast?
Adjusting the display lighting
You can adjust the display and keypad lighting by:
1. Pressing
disp
for 1 second from any mode to access the
LAMP
screen and
turn on the lights.
.
2. Press the
disp
button to cycle through the possible illumination settings:
LAMP 3
(the brightest setting)
, LAMP 2, LAMP 1, OFF, LAMP 1,
LAMP 2, LAMP 3
and so on:
• as you change the setting, the illumination on any other SeaTalk instru
ments or control units will also change.
3. The display automatically returns to the previous mode if you do not press a
button for 10 seconds:
• if you press another mode button within 10 seconds you will select the
mode assigned to that button (for example:
auto
selects Auto mode,
standby
selects Standby mode).
Notes: (1)
You can also adjust the lighting level from any other SeaTalk instrument
or control unit.
Notes: (1)
When you switch off the unit you lose any changes you have made to
the lighting level.
Adjusting the contrast
To set the display contrast level:
1. With the autopilot in Standby mode, press the
disp
button for one second to
access the
LAMP
screen.
2. Press the
disp
button for one second again, to display the
CONTRAST
screen.
3. Use the
+1
and
1
buttons to set the required contrast level (from
1
to
15
).
D3313-5
1 second
81283_1.book Page 14 Monday, October 2, 2006 2:03 PM