20
MK II Wheel Drive
Checking alignment
Move the rudder from hardover to hardover and check that at all rudder angles:
• all moving parts of the sensor remain free from any obstructions
• the sensor and connecting rod remain accurately aligned
• the ball joints do not bind
Connecting to the course computer
1. The rudder position sensor is supplied with 10 m (32 ft) of cable. Route the cable to the
course computer, taking into account the EMC installation guidelines detailed in the
course computer installation manual.
2. Connect the four cores of the cable (color for color) to the
Rudder
terminals on the
course computer as shown.
Note:
If the standard cable is not long enough, your Raymarine dealer can supply a 10 m (30 ft) exten-
sion cable (part number: D173).
D8918-1
Course computer
Screen
Blue
Red
Yellow
Green
Screen
Blue
Red
Green
Red
Yellow
Screen
Red
Yellow
Screen
Red
Yellow
Screen
SeaTalk
SeaTalk
CLUTCH
NMEA
RUDDER
RATE GYRO
FLUXGATE
87063_1.book Page 20 Monday, December 19, 2005 3:22 PM
