manualshive.com logo in svg

Raymarine Marine GPS System, Руководство пользователя

Поделиться
Скачать
Raymarine Marine GPS System Скачать руководство пользователя страница 104

 

Advanced Navigator Functions 

 

5-13 

Radar Gain Control 

The Gain control adjusts the level of the display of signals received 
from the scanner; it is equivalent to a volume control on a radio.  
The Gain control can be set either to Auto or Manual modes. 

In Auto mode, the Pathfinder Plus radar optimizes the setting.  
In harbors or close proximity to land different auto settings may 
be necessary to cater for the effects of land clutter.  

Alternatively, set both Sea Clutter and Gain to Manual mode, and then 
adjust the settings to ensure that all close small targets are visible. 
When the Gain control is set to Manual, you should check it every 
time you change the range scale.  On long range settings, the gain 
should be set to give a slight speckle in the background of the radar 
picture.  On shorter ranges, you may wish to reduce the gain slightly to 
reduce the speckle and therefore improve target definition.  Do not set 
the gain too low, or you may miss small or weak targets.

  

The new 

Gain mode (auto or manual) and values are also retained each time 
you turn the radar off or on. 

 

Note

:

 

Gain can only be adjusted if the control is set to 
Manual adjustment.  Because the SEA control affects 
the gain, you may need to manually readjust it if you 
manually change the Gain setting. 

 

To adjust the Gain:

 

1.

 

Select a range appropriate to the adjustment you want to 
make. 

2.

 

From the Pathfinder Panel, click the 

GAIN

 button. 

The Gain Functionbar buttons are displayed. 

or

 

Click the right mouse button and select 

View/Control 

Panel

.  The Control Panel appears. 

3.

 

Click the 

GAIN

 Functionbar button . The button toggles 

the control between Auto and Manual mode. 

Содержание Marine GPS System





























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды