Raymarine L1250DRC, Руководство пользователя

Страница: 175 / 246

Chapter 7: Standard Chart Operations 7-31
Ta
rge
t P
oint
A
rri
va
l
➤
To follow the current route:
1. Press the
GOTO
default soft key. The Goto/Follow soft keys are displayed.
2. Press the
FOLLOW ROUTE
soft key.
Alternatively, to follow a route:
1. Place the cursor over a route leg until the letters
RTE
and the route soft keys
are displayed then press
FOLLOW ROUTE
.
Your vessel’s current position becomes the origin and the target waypoint in
the current route becomes the active target.
The soft keys change as follows:
These options are described in the following sections.
➤
To follow the current route in reverse:
1. Press the
ROUTE
default soft key, followed by
MORE
. The route soft keys
are displayed.
2. Press the
REVERSE ROUTE
soft key. The current route is reversed on the
screen. Press
ENTER
or
CLEAR
.
3. Press the
GOTO
default soft key. The Goto/Follow soft keys are displayed.
4. Press the
FOLLOW ROUTE
soft key.
The soft keys change as follows:
These options are described in the following sections.
Alternatively:
1. Place the cursor over the route leg until the letters RTE and the route soft
keys are displayed. Press
REVERSE ROUTE
then
FOLLOW ROUTE
.
Your vessel’s current position becomes the origin and the target waypoint in
the current route becomes the active target.
Target Point Arrival
You can set up target alarms (see Section 8.3 ) to alert you when the vessel is
approaching the target point. The arrival alarm is defined as a circle (not
visible on the screen), with a specified radius around the target.
GOTO
FOLLOW
ROUTE
RTE
FOLLOW
ROUTE
D4251_1
CLEAR
ROUTE REVERSE
ROUTE
EDIT
ROUTE
STOP
FOLLOW
ROUTE
REVERSE
ROUTE
GOTO
FOLLOW
ROUTE
D4172-1
RESTART
XTE
WAYPOINT
ADVANCE
GOTO
CURSOR
STOP
FOLLOW
RTE
REVERSE
ROUTE
FOLLOW
ROUTE
81213_1.book Page 31 Monday, March 17, 2003 1:14 PM