background image

Chapter 7: Standard Chart Operations

7-15

Er

as

in

g a W

aypo

int

or

Use the alphanumeric keypad to change the character. Press the 

def/2

 

key for East, 

mn/5

 for North, 

rst/7

 for South, and 

uvw/8

 for West.

iii. Adjust each parameter until the waypoint position is correct.

When you have finished editing the position, press 

ENTER 

to save the position 

or 

CLEAR 

to cancel the operation.

Press 

ENTER 

or 

CLEAR

 again, the Waypoint Position window is removed 

from the screen and the default soft keys are displayed.

Erasing a Waypoint

You cannot erase the target waypoint or waypoints that are used in routes. 
However, you can remove a waypoint from the current route - see 

Editing a 

Route

 on 

page 7-28

If you try to erase a waypoint that is used in a saved route you are warned 

“WAYPOINT IS USED IN A ROUTE & CANNOT BE DELETED”

To delete a waypoint using the cursor:

1. Move the cursor over the waypoint, until the letters 

WPT 

are displayed. The 

waypoint soft keys are displayed.

2. Press the 

ERASE WAYPOINT 

soft key. The waypoint is removed from the 

screen and the Waypoint List is updated.

Note: 

If you have stopped a GOTO (see Stop Follow or Stop Goto on 

page 7-34), the target waypoint remains displayed as a target. You need to use 
the 

CLEAR GOTO

 soft key before you can erase the waypoint using the cursor.

To delete a waypoint using the waypoint list:

1. Select the waypoint from the waypoint list as previously described. The 

waypoint list soft keys are displayed.

 

2. Press the 

EDIT WAYPOINT

 soft key, followed by 

ERASE WAYPOINT

. The way-

point is removed from the screen and the waypoint list is updated.

Moving a Waypoint

You can move any waypoint except the target waypoint (the waypoint you are 
following). You can use the Waypoint soft keys and cursor to move the 
selected waypoint, or you can edit the waypoint position.

WARNING:

Take care when editing waypoints as it is possible to move waypoints that are 
used in routes stored in the Route Database. 

List.

WPT

ERASE

WAYPOINT

MARKS

WAYPOINT

LIST

81213_1.book  Page 15  Monday, March 17, 2003  1:14 PM

Содержание L1250DRC























































































































































































































































Отзывы: