Raymarine i50 Depth, Инструкция по установке и эксплуатации

Страница: 51 / 90

7.8 Dealer calibration — i50 Speed
The dealer calibration procedures include:
• User calibration menu access On (default) and Off.
• Display Response for speed readings — Dictates
the rate at which the instrument display responds
to changes in speed data.
• Display Response for Velocity Made Good
(VMG) readings — Dictates the rate at which the
instrument display responds to changes in VMG
data.
• Boat show mode On and Off (default) (Boat
show mode is only available on displays set as
repeaters).
• Reset to factory defaults.
Accessing the Dealer Calibration Menu
During normal operation:
1. Press and hold the
Speed and Trip buttons at the
same time for approximately 14 seconds, until
the
Dealer Calibration page is displayed.
+
D12475-2
1 0
15
20
25
30
35
40
45
50
55
60 5
14
S pe e d
T rip
Note: To exit the Dealer Calibration pages at any
time, press and hold the Speed and Trip buttons
at the same time for approximately 2 seconds.
Setting access to the User Calibration Menu
From the Dealer Calibration page:
1. Press the
Timer and Reset buttons at the same
time to display the User Calibration Access
page.
D12476-2
+
T ime r R e s e t
2. Use the Timer and Reset buttons to switch
access to the User Calibration Menu
On (default) and Off.
Selecting Off disables access to the
User
Calibration Menu .
Note: To exit the Dealer Calibration pages at any
time, press and hold the Speed and Trip buttons
at the same time for approximately 2 seconds.
Setting the response delay for speed
readings
From the User Calibration Menu Access page:
1. Press the Speed button until the Speed
Response page is displayed (1 press from User
Calibration Menu Access page).
D12477-2
S pe e d
2. Use the Timer and Reset buttons to adjust the
speed response to the required level.
The default level is 12. The levels available are 1
to 15 with level 1 being the slowest update rate
and level 15 the quickest.
Note: To exit the Dealer Calibration pages at any
time, press and hold the Speed and Trip buttons
at the same time for approximately 2 seconds.
Setting the response delay for VMG (wind)
readings
From the User Calibration Menu Access page:
1. Press the Speed button until the VMG Response
page is displayed (2 presses from User
Calibration Menu Access page).
D12478-2
S pe e d
2. Use the Timer or Reset buttons to adjust the
VMG response to the required level.
The default level is 12. The levels available are 1
to 15 with level 1 being the slowest update rate
and level 15 the quickest.
Note: To exit the Dealer Calibration pages at any
time, press and hold the Speed and Trip buttons
at the same time for approximately 2 seconds.
Enabling and disabling Boat Show Mode
From the User Calibration Menu Access page:
1. Press the Speed button until the Boat Show
Mode page is displayed (3 presses from User
Calibration Menu Access page).
D12479-2
S pe e d
2. Use the Timer and Reset buttons to switch boat
show mode On and Off (default).
Selecting On will put the display into boat show
mode.
Note: Boat show mode is only suitable for
demonstration purposes and should NOT be used
whilst your vessel is in use.
Note: To exit the Dealer Calibration pages at any
time, press and hold the Speed and Trip buttons
at the same time for approximately 2 seconds.
Resetting the display to factory defaults
From the User Calibration Menu Access page:
1. Press the Speed button until the Factory
Defaults page is displayed (4 presses from User
Calibration Menu Access page).
D12480-2
S pe e d
2. To reset the display to factory default settings:
i50 Speed
51