Raymarine hsb2 PLUS Series, Руководство пользователя

Страница: 156 / 248

6-10 hsb
2
PLUS Series Color LCD Display
Data Log
Mod
e
Note: If the display unit is receiving RTCM data via NMEA, repeating a dif-
ferential fix from another unit, the
MODE
soft key is set to
AUTO
and is grayed
out. If receiving RTCM data, the setting must be performed manually on the
external DGPS receiver .
3. To set a new beacon manually, press
BEACON SELECT
, use the soft keys to
set the required beacon frequency and bit rate.
Press
ENTER
to return to the Differential GPS Setup pop-up window.
The status of the selected beacon is displayed in the pop-up.
Press
ENTER
to return to the Navigation Status window, then
ENTER
to
return to the
MENU
soft keys.
6.7 Data Log Mode
You can set the chartplotter to log course data every thirty minutes. Up to 48
log entries are held, when 48 entries have been made, the chartplotter will start
overwriting the first entries.
You start the log using soft keys provided in Data Log Mode. When you select
Data Log Mode the log is displayed full-screen. If the screen is full, you use the
trackpad to scroll the list and view further log entries. Each line in the log
shows:
• Time of log entry
• Position at time of log entry
• Course Made Good (CMG) since last log entry
• Distance Made Good (DMG) since last log entry
Once you have enabled the data log, data is continually logged, but you must
set the display to Data Log Mode to view it. You use the
DISPLAY
key to
change the full-screen mode.
You can stop the log at any time and you can clear the log from memory.
If the chartplotter is switched off while the log is running, a dashed line will be
displayed before the first new entry since switching the chartplotter on again.
➤
To activate Data Log Mode:
1. Press
DISPLAY
, the
DISPLAY
pop-up is shown.
2. Press
DISPLAY
again, until
LOG
is selected, then press
ENTER
.
➤
To start recording log entries, press the
START LOG
soft key.
As shown in Figure 6-5 , the chartplotter records the time and vessels position.
Every thirty minutes the time, new position, distance made good and course
made good are recorded.
The START LOG soft key changes to STOP LOG .
DISPLAY
START LOG