Raymarine hsb2 PLUS Series, Руководство пользователя

Страница: 47 / 248

Chapter 2: Getting Started 2-11
MULTI
Controls guard zone alarm sensitivity, and tuning the receiver.
Also controls display lighting and brightness.
- Press to display sliders.
Select a slider using the soft key or trackpad.
Toggle between Auto/Man or off/on by pressing key again.
Adjust slider using trackpad, and press
ENTER to finish.
Press and hold MULTI key to set brightness to 100%.
Soft Key Labels:
Change when you press a key.
Default soft key labels are shown.
Trackpad
Controls cursor position on the screen, and also the sliders
and setup options.
Hold the trackpad down to move the cursor faster.
CLEAR
Cancels operation in progress and returns to the
previous display.
Deletes an object/function under cursor control.
ENTER
Confirms selection and (if appropriate) clears current
soft key labels. It performs the selected task,
accepts changes, or leads to display of more options.
When cursor text is displayed, takes cursor control
of the object.
When arrow-head cursor symbol is displayed, drops
the object under cursor control.
Soft keys
Press to select option, or highlight option or slider.
Labels change when you press soft/dedicated key.
Elipses (...) after the text indicate that pressing soft
key leads to a further display of soft key options.
POWER
Press and hold until unit beeps to turn on display.
Press to toggle between Standby and Transmit.
Press for 3 seconds to turn off display.
Press soft key to display required setup menu, then use trackpad
to select option and soft key to change setting.
Press
ENTER to close menu, and CLEAR to to finish.
MENU
Provides access to setup options.
- Press to display soft keys.
DISPLAY
Controls display mode and windows.
- Press for display mode and soft keys display.
- Press again to toggle through display modes, and ENTER
- Press and hold for 2 seconds for full screen display of the upper
window.
MARKS / MOB
Controls placing marks, and Man Overboard function.
- Press to place mark at cursor position, and use trackpad
to move mark. Press
ENTER to finish.
- Press and hold for 2 seconds to activate or cancel MOB.
VRM/EBL
Used to measure range and bearing to/between targets.
- Press to place VRM/EBL if one not already placed.
Adjust position using trackpad, and press
ENTER to finish.
- Press to display soft keys if VRM/EBL already placed.
D5665_1
GAIN
Controls the presentation of radar targets.
GAIN controls background noise (speckle).
SEA controls sea clutter.
RAIN controls rain clutter around the vessel.
FTC controls rain clutter at a distance.
- Press for soft keys display.
RANGE
Controls range scale. Range scale and range rings are
shown in the Status Bar.
- Press top of key to increase the range scale.
- Press bottom of key to decrease the range scale.
- Press and hold to change the scale faster.
ALARMS
Used to control guard zones.
- Press to place guard zone if one not already placed.
Adjust size/shape using trackpad, press
ENTER to finish.
- Press to display soft keys if guard zone already placed.
Select a slider using the soft key or trackpad.
Toggle between Auto/Man or off/on by pressing soft key again.
Adjust slider using trackpad, and press
ENTER to finish.
50%
O
F
F
75%
O
F
F
RAIN SEA FTC GAIN
MANUAL MANUAL
Use soft key to toggle zone on or off.
Adjust size/shape using trackpad, and press
ENTER to finish.
GUARD 1
OFF ON
GUARD 2
OFF ON
Use soft key to toggle VRM/EBL on or off.
Press FLOAT to access float options for existing VRM/EBL.
Press VRM/EBL DATABOX to toggle data box display off/on.
FLOAT¬
VRM/EBL2
OFF ON
VRM/EBL1
OFF ON
VRM/EBL
DATABOX
OFF ON
Press soft key to toggle window on/off, or return to full screen.
Zoom: Press ZOOM key to display zoom window option.
Move Zoom box using trackpad, press
ENTER to finish.
SELECT
WINDOW
WINDOWS
OFF ON
SYSTEM
SET UP¬
RADAR
SET UP¬
ALARM
ON
25%
TUNE
A
U
T
O
LIGHT
75%
ZOOM...
MARPA
SET UP¬
MARPA SCREEN TARGETS HDG MODE