Raymarine hsb2 PLUS Series, Руководство пользователя

Страница: 103 / 248

Chapter 4: Integrated Radar Operations 4-5
Man
Ov
er
bo
ard
(M
O
B
)
Moving or Deleting a Mark
You can move or delete marks using the context-sensitive cursor.
➤
If you have placed a mark and wish to move it later:
1. Move the cursor over the mark until the letters
MRK
are displayed.
2. Press
ENTER
to take control of the mark.
3. Move the mark to the new position using the trackpad.
4. Press
ENTER
again to drop the mark in its new position, or
CLEAR
to aban-
don the operation and return the mark to its previous position.
➤
To delete an individual mark, move the cursor over the mark until the letters
MRK
are displayed, then press
CLEAR
.
4.4 Man Overboard (MOB)
If you lose a person or object overboard, and need to return to the location, you
should use the Man Overboard (MOB) function immediately.
Note: To obtain an MOB position, you need either of the following:
• Position data from a GPS or equivalent device
• Heading and speed data, so that the position can be calculated by dead
reckoning
You can select the type of data used for the MOB position using the Set Up
Menus (see
Section 7.3 ).
➤
To initiate the MOB procedure, press and hold the
MARKS
key for two
seconds.
The Pathfinder Plus Radar then performs all the following tasks
automatically:
• Marks the current position with a MOB symbol.
• The MOB waypoint replaces any current active waypoint and route.
• Displays the MOB data box, showing the bearing and distance from your
vessel to the MOB waypoint position, and the elapsed time since the MOB
was initiated.
• Displays the position data box, showing your vessel’s position.
• As your vessel moves away from the MOB position, a dotted line is dis-
played connecting the MOB position and the vessel’s current position.
• Sounds a 4-second alarm pattern every 30 seconds.
• Sends an MOB message to other units in the system, via the SeaTalk con-
nection.
MRK
MARKS