Raymarine GPS Plotter, Руководство пользователя

Страница: 72 / 131

Chapter 3: Operation 3-43
Naming, Erasing and Showing a Track
➤
To name an existing track, erase a track or show a track:
1. Press the
TRACK LIST
soft key; the Track List is displayed.
The highlight indicates the selected track.
2. Using the trackpad top/bottom, select the required track and press the
SAVE TRACK
,
NAME TRACK
or
ERASE TRACK
soft key.
3. To
NAME
a track, use the trackpad left/right to select the character you
wish to edit and the trackpad top/bottom to change the character.
4. Press
ENTER
to finish the operation or
CLEAR
to cancel the name.
5. To
ERASE
a track you are prompted to confirm:
i. Press
NO
to cancel the operation, then
ENTER
if you wish to
remove the Track List.
ii. Press
YES
to erase the track from the Track List, then
ENTER
to
remove the Track List.
6. If you select
SHOW
a track when a current, unsaved track is displayed,
you are prompted to save the current track. Proceed as described in
Clearing the Current Track on page 3-41 or press the
NO
soft key to
cancel the operation.
The Track List is removed and the selected track is displayed.
81171_4.BOOK Page 43 Thursday, November 29, 2001 11:34 AM