Raymarine GPS Plotter Скачать руководство пользователя

Страница: 49 / 131

3-20

Raynav 300 GPS Plotter

3. If the the deleted waypoint was the only waypoint in the list, the

default soft keys are displayed, otherwise, press

CLEAR

three times to

return to the default soft keys.

➤

To delete a waypoint using the cursor:

1. Move the cursor over the waypoint until the letters

WPT

are displayed.

The waypoint soft keys are displayed.

2. Press the

ERASE WAYPOINT

soft key. The waypoint is removed from

the screen and the Waypoint List is updated.

Moving a Waypoint

You can move any waypoint except the target waypoint (the waypoint
you are navigating towards). You can use the Waypoint soft keys and
cursor to move the selected waypoint, or you can edit the waypoint
position.

CAUTION:

Take care when editing waypoints as it is possible to move waypoints
that are used in routes stored in the Route List.

➤

To move a waypoint using the Waypoint Edit functions:

1. Select the waypoint using either the cursor or the Waypoint List as

described in

Selecting a Waypoint

page 3-17

; the waypoint soft

keys are displayed.

2. To edit the waypoint position, proceed as previously described in

Editing Waypoint Details

page 3-18.

➤

To move a waypoint using the cursor:

1. Move the cursor over the waypoint, until the letters

WPT

are dis-

played.
The waypoint soft keys are displayed.

2. Press

MOVE WAYPOINT

, the cursor changes to a four-headed arrow.

3. Move the cursor to the required waypoint position.
4. Press

ENTER

to set the position and return to normal cursor control or

press

CLEAR

to cancel the operation.

81171_4.BOOK Page 20 Thursday, November 29, 2001 11:34 AM

Содержание GPS Plotter




































































































































Результаты поиска

Содержание GPS Plotter

Отзывы:

Похожие инструкции для GPS Plotter

Бренды по названию

Популярные бренды

Raymarine GPS Plotter, Руководство пользователя

Результаты поиска

Содержание GPS Plotter

Отзывы:

Похожие инструкции для GPS Plotter

Бренды по названию

Популярные бренды