Raymarine GPS Plotter Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 131

background image

Chapter 3: Operation

3-31

Note:

Apart from Moving a Waypoint used in other route(s), any chang-

es made to the route affect the current route only. The current route must
always be Saved in order to keep the changes.

Inserting a Waypoint into a Route

The context-sensitive cursor can be used to insert one or more waypoints
into the current route. However, if the route is being followed, a waypoint
cannot be inserted into the current leg.

➤

To insert a new waypoint into the current route:

1. Move the cursor over the route leg into which a waypoint is to be

inserted; the letters

RTE

appear and the Route Leg Data Box and Route

soft keys are displayed, see

Figure 3-34

.

2. Press

ENTER

; the cursor changes to a four-way arrow, controlling a

new waypoint. The waypoint is connected to the existing waypoints
on either side with a dashed line.

3. Move the new waypoint to the required position and press

ENTER

to

place it and return to normal cursor operation, or

CLEAR

to abandon

the operation.

The new waypoint is temporarily added to the Waypoint List and named
with the first available waypoint number. The waypoints in the current
route are re-numbered to identify the new positions.

Note:

If you clear the route without saving it, the new waypoint is re-

moved.

Adding/Removing Waypoints at the End of the Route

Waypoints can be added or removed by either using the Waypoint List,
see

Placing a Waypoint

on

page 3-13

, or as described below.

➤

To add waypoints to the end of the route:

1. Press the

ROUTE

soft key, followed by the

EDIT ROUTE

soft key.

The Make Route soft keys are displayed (

Figure 3-30

) and the cursor

is connected to the last-placed waypoint with a dotted line. Further
waypoints can be added to the route in the same way as for a new
route.

2. Move the cursor to the required location, and press

PLACE WAYPOINT

soft key.

3. Place as many waypoints as required and press the

ACCEPT ROUTE

soft key; the default soft keys are displayed.

Note:

If you have placed waypoint(s) incorrectly, press the

UNDO WAY-

POINT

soft key. Repeat to remove successive waypoints from the route, in-

cluding existing waypoints.

81171_4.BOOK Page 31 Thursday, November 29, 2001 11:34 AM

«
...
58
59
60
61
62
...
»

Содержание GPS Plotter




































































































































Отзывы:

Нет отзывов

Похожие инструкции для GPS Plotter

Бренд: Quuppa Страницы: 21

GPSMAP 7400 Series

Бренд: Garmin Страницы: 6

Бренд: Garmin Страницы: 2

Forerunner 205 - Running GPS Receiver

Бренд: Garmin Страницы: 76

ECHOMAP UHD2 5X

Бренд: Garmin Страницы: 3

Бренд: Garmin Страницы: 95

Бренд: GPS Insight Страницы: 24

Бренд: IntelliTrac Страницы: 6

Бренд: Garmin Страницы: 2

Бренд: Navman Страницы: 44

208 Touch Screen Navigation

Бренд: PEUGEOT Страницы: 183

Toucan N Series

Бренд: nimble Страницы: 2

Бренд: Spytec Страницы: 6

TimeSource 3100

Бренд: Symmetricom Страницы: 238

Бренд: NexTraq Страницы: 32

Бренд: FALK Страницы: 121

DEGERtracker S60H CF

Бренд: Deger Страницы: 40

Navigator Navigator 3

Бренд: TomTom Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды