Raymarine GPS Plotter Скачать руководство пользователя страница 48

Страница: 48 / 131

Chapter 3: Operation

3-19

The

NAME WAYPOINT

window is displayed.

5. Use the trackpad to enter or edit the name:

•

Use the trackpad left/right to move the cursor to the character to
be changed.

•

Use the trackpad top/bottom to scroll through the characters.

6. When name editing is complete, press

ENTER

to save the name and

remove the window, or

CLEAR

to cancel the operation. The waypoint

name replaces the waypoint number.

7. Press

CLEAR

to return to the default soft keys.

8. To edit the waypoint position, press the

EDIT WAYPOINT

soft key, fol-

lowed by

POSITION

The Waypoint Position pop-up box is displayed.

9. Use the soft keys to select

LAT

LON

BRG

RNG

Note:

If no fix has been acquired, the

SET BRG

and

SET RNG

soft keys are

unavailable and grayed out.

10. Use the trackpad to edit the value:

•

Use the trackpad left/right to move the cursor to the character to
be changed.

•

Use the trackpad top/bottom to scroll through the characters.

•

Adjust each parameter until the waypoint position is correct.

11. When position editing is complete, press

ENTER

to save the position

CLEAR

to cancel the operation.

The Waypoint Position window is removed from the screen and the
default soft keys are displayed.

Erasing a Waypoint

In plotter mode you cannot erase the target waypoint or waypoints that
are used in routes. However, you can remove a waypoint from the current
route - see

Editing a Route

page 3-30

If you try to erase a waypoint that is used in a saved route you are warned

WAYPOINT IS USED IN A ROUTE & CANNOT BE DELETED

➤

To delete a waypoint using the Waypoint List:

1. Select the waypoint from the Waypoint List as previously described.

The Waypoint List soft keys are displayed.

2. Press the

EDIT WAYPOINT

soft key, followed by

ERASE WPT

. The way-

point is removed from the screen and the Waypoint List is updated.

81171_4.BOOK Page 19 Thursday, November 29, 2001 11:34 AM

Содержание GPS Plotter




































































































































Результаты поиска

Содержание GPS Plotter

Отзывы:

Похожие инструкции для GPS Plotter

Бренды по названию

Популярные бренды

Raymarine GPS Plotter, Руководство пользователя

Результаты поиска

Содержание GPS Plotter

Отзывы:

Похожие инструкции для GPS Plotter

Бренды по названию

Популярные бренды