Raymarine G-Series system, Инструкция по установке

Страница: 37 / 180

Device Type Suitable Devices Connectivity
• 4 x composite video
inputs (PAL or NTSC).
Only 3 available if
S-Video input in use).
• 1 x S-Video input
(PAL or NTSC).
• 1 x stereo line-level
audio input (for
S-Video / Composite
input 4 only).
Note: Video
connected to the
GVM400 can be
viewed on any
G-Series displays
on the SeaTalk
hs
network.
2.15 Networking constraints
The following constraints apply when networking an E-Series
Widescreen display with a G-Series system.
General
• E-Series Widescreen displays must be connected to the G-Series
system via SeaTalk hs .
• E-Series Widescreen displays can be connected via NMEA 0183.
• E-Series Widescreen displays must NOT be connected to
SeaTalk ng when part of a G-Series network.
• E-Series Widescreen displays must NOT be connected to SeaTalk
when part of a G-Series network.
Master / slave operation
• When using an E-Series Widescreen display in a G-Series
system, the G-Series GPM processor unit is ALWAYS the data
master.
Nav stations
An E-Series Widescreen display can NOT form part of a G-Series
Nav Station configuration.
Home screen sharing
• For networks featuring ONLY E-Series Widescreen units:
– Networked E-Series Widescreen units share home screens.
• For networks featuring ONLY G-Series GPM processor units:
– Networked GPM processor units share home screens.
• For networks featuring E-Series Widescreen AND G-Series GPM
processor units:
– E-Series Widescreen units share home screens.
– GPM processor units share home screens.
Planning the installation
37