Raymarine E70058, Инструкция по установке и эксплуатации, Страница: 23 / 68

SeaTalk connection
Connections to an existing SeaTalk system must be made using a
SeaTalk to SeaTalk
ng adaptor cable.
Basic SeaTalk system example
12 V dc
12 / 24 V dc
D12058-2
9 8
1 1 1 2
4 1 2 3
7
5
6 6 7
1 0
1 i70 Instrument display (SeaTalk ng )
2 i50 Speed instrument (SeaTalk ng )
3 i50 Depth instrument (SeaTalk ng )
4 Raymarine wind vane transducer
5
i60 Wind instrument (SeaTalk ng )
6 SeaTalk ng cables
7 SeaTalk to SeaTalk ng adaptor cables
8 Speed transducer
9 Depth transducer
10 12 / 24 V dc power supply
11 SeaTalk Course computer (providing
12 V dc power to SeaTalk network.)
12
ST6002 pilot controller (SeaTalk)
SeaTalk accessories
SeaTalk cables and accessories for use with compatible products.
Description Part No Notes
3–way SeaTalk junction
box D244
1 m (3.28 ft) SeaTalk
extension cable D284
3 m (9.8 ft) SeaTalk
extension cable
D285
5 m (16.4 ft) SeaTalk
extension cable D286
9 m (29.5 ft) SeaTalk
extension cable D287
12 m (39.4 ft) SeaTalk
extension cable E25051
20 m (65.6 ft) SeaTalk
extension cable D288
NMEA2000 connection
You can either:
• Use your SeaTalk ng backbone and connect each NMEA2000
device on a spur, OR
• connect the instrument display on a spur into an existing
NMEA2000 backbone.
Important: You cannot have any 2 terminated backbones
connected together, unless you have an isolation gateway
between the two backbones.
Connecting NMEA2000 equipment to the SeaTalk ng backbone
12V NMEA 2000
SeaTalkng
D12380-1
3
1
2
4
1. 12 V dc power supply into backbone.
2. SeaTalk ng backbone.
3. SeaTalk ng to DeviceNet adaptor cable.
4. NMEA2000 equipment.
Connecting the unit to an existing NMEA2000 (DeviceNet)
backbone
D12377-1
1
4
2
3
1. SeaTalk ng instrument display
2. SeaTalk ng to DeviceNet adaptor cable.
3. DeviceNet backbone.
4. NMEA2000 equipment.
Cables and connections 23