Raymarine Axiom Pro 12, Руководство по установке

Страница: 206 / 360

NMEA 0183 settings — Axiom Pro
NMEA 0183 devices can be connected to Axiom Pro MFDs using the NMEA 0183 wires on the
supplied Power/Video/NMEA 0183 cable..
2 NMEA 0183 ports are available:
• Port 1: Input and output, 4,800 or 38,400 baud rate.
• Port 2: Input only, 4,800 or 38,400 baud rate.
The baud rate for each input port must be specified in the NMEA set-up menu (Homescreen >
Settings > Network > NMEA set-up ).
Note:
• For Port 1, both the input and output communicate at the same baud rate. For example, if you
have one NMEA 0183 device connected to Port 1 INPUT, and another NMEA 0183 device
connected to Port 1 OUTPUT, both NMEA devices must use the same baud rate.
NMEA 0183 settings
The following options are available from the NMEA Set-up menu
Menu item Description Options
NMEA Port 1 Baud rate selection. • 4,800
• 38,400
NMEA input port 2
Baud rate selection. • 4,800
• 38,400
Bridge heading Bridge heading data from
NMEA 0183 to NMEA 2000 /
SeaTalkng ®
• Yes
• No
Transmission mode Switches between single-ended
and differential transmission. • Single-ended
• Differential
Individual outputs
List of NMEA 0183 sentences
for which the output can be
disabled. • Enabled
• Disabled
40