Raymarine Axiom Pro 12, Руководство по установке

Страница: 100 / 360

14
Configuring Transducer settings
For systems set up with Sonar, you should configure your transducer
settings.
1. Select Transducer from the Sonar app’s Settings menu: Menu
> Settings > Transducer
2. Select how you want your depth to appear:
i. Below transducer (default) — No offset required
ii. Below keel — Enter the distance between the transducer face
and the bottom of the Keel.
iii. Below waterline —Enter the distance between the bottom of
your Keel and the waterline.
3. If your transducer includes a temperature sensor then you can also
configure temperature settings as follows:
i.
Enable or disable temperature readings as required.
ii. If enabled, check the temperature reading against the actual
water temperature.
iii. If the current reading requires adjustment, select Calibrate
temp and enter the difference between your 2 readings.
Assigning a function to the User Programmable
Button
You can assign a function to the User Programmable Button on an
Axiom™ Pro MFD.
1. Press and hold the User Programmable Button.
2. Select the function from the list.