Raymarine autopilot, Руководство пользователя

Страница: 96 / 139

Chapter 7: Adjusting Autopilot Settings 83
7
Adjusti
ng Au
to
pil
ot
Setti
ng
s
Using data pages to set up ST60 and ST80 remote
control
Where the is used in conjunction with ST60 or ST80
instrumentation, you can use the to control the ST60 or
ST80 instruments by duplicating the functions of the Remote
Keypads used by these instruments. This means you can operate your
autopilot and ST60/ST80 instruments from the same location.
By using the
INST REM
and
MAXI REM
data pages, you can use
as a remote keypad to control any ST60 or ST80
instruments connected to it:
• the
INST REM
data page can control a standard (110 mm)
ST60/ST80 instrument group
•
the MAXI REM
data page can control an ST80 Maxiview
instrument group
Each can control one group of up to eight standard
instruments and another group of up to eight Maxiview instruments.
Before you can use an to remotely control other
instruments, you must define the instrument grouping and then
allocate the to the required group.
Instrument grouping
Grouping allows you to create up to eight standard instrument and
eight Maxiview instrument groups:
• each group can have up to eight instruments
• each group must have one or more remote keypads or an
grouped to it
• each can be grouped with one ST80 Maxiview group
and one ST80/ST60 standard instrument group
• each instrument in a group has a unique alphanumeric identity
(e.g.
A1
, where
A
defines the group and 1 the instrument sequence
number within the group):
•
standard ST60 or ST80 instruments are assigned group letters
from A to H
• maxiview instruments are assigned group letters from J to Q
• ungrouped instruments have a dash (-) in place of a group
letter
• The instrument sequence number range is from 1 to 8.