![Raymarine autopilot Скачать руководство пользователя страница 59](http://html1.mh-extra.com/html/raymarine/autopilot/autopilot_owners-handbook-manual_4089372059.webp)
46
Autopilot Control Unit - Owner’s Handbook
5
Install
ing
the
5.1 Select the location
Site requirements
Locate the control unit so it is:
•
within easy reach from the steering position
•
viewable straight on, or with a maximum viewing angle of 30°
•
protected from physical damage
•
at least 230 mm (9 in) from any compass
•
at least 1 m (3 ft) from any radio or radar receivers or transmitters
The selected location should also:
•
be clean, smooth and flat
•
be accessible from behind (so you can secure and run cables)
•
have sufficient space to accommodate the rear of the control unit
and connectors
•
allow at least 6 mm (
1
/
4
in) between adjacent control
units/instruments so you can fit their sun covers
•
meet the cabling and EMC installation guidelines detailed below
CAUTION:
The front cover is waterproof when installed according
to the following instructions. However, you must protect the rear
of the control unit from water in a ventilated and drained area.
D4219-2
175 mm (6.9 in)
24 mm
(0.9 in)
90 mm (3.55 in)
115 mm (4.5 in)
17 mm
(0.7 in)
Содержание autopilot
