Raymarine autopilot, Руководство пользователя

Страница: 72 / 139

Chapter 6: Commissioning the Autopilot 59
6
C
om
m
iss
io
nin
g th
e A
uto
pilo
t
Step 4 - Adjust basic autopilot settings
Note: For more information about these calibration settings refer to
the following pages: vessel type (page 94), drive type (page 94),
rudder sensor alignment (page 94), rudder limits (page 95).
The autopilot system has four main calibration groupings, as
illustrated on the following page (for more information about these
groupings see Chapter 7: Adjusting Autopilot Settings).
The next step in the dockside set-up is to enter Dealer Calibration
mode so you can adjust some basic autopilot settings.
Enter Dealer Calibration mode
1. Start with the autopilot in Standby mode.
2. Enter
DEALER CAL
as follows:
• press and hold the
standby
key for two seconds to enter the
Calibration mode
• when the screen shows
DISPLAY CAL
, press the
disp
key or
up
/
down
arrow keys until you see the
DEALER CAL
screen
• press the
auto
key: the display will change to
CAL
• press the
-1
and
+1
keys together to enter Dealer Calibration
(
DEALER CAL
)
Set the vessel type
1. Use the
disp
key to page through the Dealer Calibration screens
until you reach the
VESSEL TYPE
screen.
2. Use the
-1
or
+1
keys to select a vessel type suitable for your boat:
• Displacement:
DISPLACE
• Semi Displacement:
SEMI DISPLACE
• Planing:
PLANING
• Stern (I/O) Drive:
STERN DRV
• Work Boat:
WORK BOAT
• Sail Boat:
SAIL BOAT
Note: When you select the vessel type, the autopilot will select
appropriate defaults for various other calibration settings.