Raymarine Autohelm 2000, Руководство пользователя

Страница: 5 / 18

BASIC INSTALLATION
the Aulohelm 2000 can usually be
mounled onto Starboard
seal (Fig 3). Proceed as
TILLER PIN (Cal No. 0001)
l Drill 6mm hole x 25mm (1”)
deep al marked.
l Using a Iwo epoxy adhesive such
as Araldile, bond the tiller pin into
place.
l Position shoulder pin
above
MOUNTING SOCKET
(Ca! No.
Drill hole x 25rnrn (1”)
deep starboard cockpil seal.
II thickness al
is less 25mm
reinforce under
surface wilh a plywood bonded
into position.
the mounling using Iwo
epoxy adhesive.
Note The is capable
generating high loads. Ensure
l
The epoxy is allowed to harden
before applying any loads;
l Ail holes are drilled to size and
where necessary is
provrded.
SOCKET
PIN
INSTALLATION
EXTENSIONS (Fig.4)
ACCESSORIES The
II is not possible lo drive unil
directly onto cockpil seal or as
described, one lollowing
accessories (or will ensure
a perfect
exlended using one slandard
exlensions. Drrnension C
IS
as
Dimension C
Length L Cat No.
. __
622mm (24.5”) Sld Dimension’
.
646mm (25.5”) 25mm (1”)
673mm (26.5”)
51 mm (2”)
699mm (27.5”)
76mm (3”)
. . .
724mm (26.5”)
(29.5;;) -- 127mm
775rnm (30.5”)
. --