Raymarine Autohelm 2000, Руководство пользователя

Страница: 4 / 18

INSTALLATION
DRIVE UNIT
The drive unil is mounled belween the
and a single allachmenl poinl on the
yacht’s structure. After connection to the
yacht’s 12 volt electrical system the unit
becomes operational.
For installation two basic
dimensions are critical (Fig.l):-
Dimension A 620mm (24.5”)
mounling socket lo tiller pin
Dimenslon B 460mm (16”)
rudder stock cenlre line to pin
Clamp tiller on the yacht’s cenlre
line and mark dimensions A and B (A
is measured on the STARBOARD side of
the cockpit) using masking tape to locate
the fixing points. Ensure the
measurements are at right angles as
shown.
The drive unit must be mounted
horizontally.
SLOPING RUDDERSTOCK
In certain it may be more
convenient to mount the on lhe
side. When this is the case, the
changeover switch will require
adjustment as Use a screwdriver
to rotate switch until
the is reached (Fig. 2).
Never force the changeover switch,
light pressure only Is required.
MOUNTING