Raymarine Autohelm 2000, Руководство пользователя

Страница: 8 / 18

PEDESTAL SOCKET MOUNTING
II may be necessary lo raise ot
above
mounting For this a pedeslal
sockel is used.
Selection
l Lock on the yacht’s cenlre
tine.
l Establish the slandard control
dimensrons A and B.
l Measure dimension G (Fig.8)
ensuring Aulohetm is
horizontal.
Setecl appropriale pedestal
socket assembly from table
shown.
Installation
l Mark oft position mounling
llange on cockpil seal or
l Ensure control dimensrons A and
B
l Mark and 3 x (V
I
”)
clearance holes (ignore Iwo inner
ltange using 3 x 6mm
diameter bolls, nuls and washers,
being sure back ptale is installed
correclty. Bed ltange on a thin coat
silicone rubber sealanl (Frg.9.)
l
Screw mounling socket lirmty
place.
When Aulohelm is in use
mounling sockel may be unscrewed lo
leave
cockpit unobslrucled.
Dimension G Pedestal Socket Length L Cat No.
38mm Std. Dimension
---
76mm (3.0”) 38mm (1.5”) DO26
(3.5”)
50mm (2.0”) DO27
.
(4 64mm (2.5”) DO28
(4.5”) 76mm (3.0”)
DO29 --
. __
127mm
89mm (3.5”) DO30
TILLER PINS
For non-slandard inslattations
range litler pins is available.
Description
Sire
Cat No.
. .
Small lhreaded titter pin
25mm
Extra length tiller pin
72mm (2.8”) D O 2 0
Extra lhreaded tiller pin
72mm (2.8”) D O 2 1
10