R
R
R
R
R
R
R
R
A
A
A
A
A
A
A
A
Y
Y
Y
Y
Y
Y
Y
Y
D
D
D
D
D
D
D
D
O
O
O
O
O
O
O
O
N
N
N
N
N
N
N
N
5.4.3.
Steps to Generate a Report
User can generate test report from a specific
to generate the Instant Report. Refer to Section 5.3 on the communications port set up.
1.
Start the RA-530 Report & Tools software in the computer and goes into the Report Generation Interfaces.
2.
Connect the computer with analyzer using the provided USB cable
3.
Select the correct COM port number in
background color of the area should change from
established.
RAYDON Electronics Technology Co., Ltd.
Phone: +86 20 8478 1227
Web Site:
eMail: [email protected]
Steps to Generate a Report
specific channel when it is at READY or FINISHED state. The following shows the step
to generate the Instant Report. Refer to Section 5.3 on the communications port set up.
Tools software in the computer and goes into the Report Generation Interfaces.
using the provided USB cable
Select the correct COM port number in the communications set up area and press the
background color of the area should change from Red to Green to indicate communications between the devices is
RAYDON Electronics Technology Co., Ltd.
478 1227 Fax: +86 20 3478 1237
Web Site:
http://www.batterytesting.com.cn
Page 51 of 70 Pages
channel when it is at READY or FINISHED state. The following shows the step
Tools software in the computer and goes into the Report Generation Interfaces.
the communications set up area and press the “Connect” push button, the
communications between the devices is
