Raydon RA-530 Series Скачать руководство пользователя страница 18

Страница: 18 / 70

2.4.2.

Power ON

After connected the Line Power and adjusted the

located at the left hand side of the front panel.

before turning on the power.

When the power is ON, LED in the green Power

At this time check the all other LEDs on the front panel should be OFF, except Channel Selection Button for Channel #1,

which indicates channel 1 is selected as default.

display will show as following:

When it is done, the LCD display will show the status of Channel #1 on its screen. Check Section 3.2 for further operations.

！

Please

make

sure

that

there

battery

before turning on the power switch.

！

If LCD displays un-recognizable

again.

the

situation

persists

personnel to check the Line Voltage with a DMM. Normally this will happen

when Line Voltage drops below 100Vac.

RAYDON Electronics Technology Co., Ltd.

Phone: +86 20 8478 1227

Web Site:

eMail: [email protected]

After connected the Line Power and adjusted the “Line Voltages Setting Switch”, user may now turn on the Power Switch

front panel. Please make sure that there is no battery connected to any of the channel

Power Switch will turn on to indicate the power is ON.

At this time check the all other LEDs on the front panel should be OFF, except Channel Selection Button for Channel #1,

which indicates channel 1 is selected as default. BTI-850B should go through an initialization stage, at this stage, the LCD

When it is done, the LCD display will show the status of Channel #1 on its screen. Check Section 3.2 for further operations.

READY

that

there

battery

connected

any

the

channel

before turning on the power switch.

recognizable characters, please turn the power OFF and

situation

persists,

please

ask

your

electricity

personnel to check the Line Voltage with a DMM. Normally this will happen

when Line Voltage drops below 100Vac.

RAYDON Electronics Technology Co., Ltd.

478 1227 Fax: +86 20 3478 1237

Web Site:

http://www.batterytesting.com.cn

[email protected]

Page 16 of 70 Pages

, user may now turn on the Power Switch

connected to any of the channel

to indicate the power is ON.

At this time check the all other LEDs on the front panel should be OFF, except Channel Selection Button for Channel #1,

should go through an initialization stage, at this stage, the LCD

When it is done, the LCD display will show the status of Channel #1 on its screen. Check Section 3.2 for further operations.

connected

any

the

channel

characters, please turn the power OFF and

please

ask

your

electricity

technical

personnel to check the Line Voltage with a DMM. Normally this will happen

Содержание RA-530 Series







































































Результаты поиска

Содержание RA-530 Series

Отзывы:

Бренды по названию

Популярные бренды

Raydon RA-530 Series, Руководство пользователя

Результаты поиска

Содержание RA-530 Series

Отзывы:

Бренды по названию

Популярные бренды