Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL- RFL-C6600S
5
1.4
Optical Safety
Any dust on the end of the collimator assembly can burn the lens and damage the laser.
CAUTION:
If the output of the device is delivered through a lens with
an anti-reflection coating,make sure that the lens is of good quality and
clean.
1.5
Electrical Safety
(1)
Make sure yourproduct is grounded through the PE line of the AC power cord. The
grounding must be firm and reliable.
WARNING:
Any interruption from the protective earth will electrify
the enclosure, which may result in personal injury.
(2)
Make sure that the correct voltage of the AC power source is used.
CAUTION:
Failure to connect the correct voltage could damage the
product.
1.6
Other Safety Rules
a) Never look directly into the laser output port when power is supplied to the laser.
b) Avoid using the laser in a dim or darkened environment.
c) If this device is used in a manner not specified in this document, the protection
provided by the device may be impaired and the warranty will be voided.
d) There are no operator serviceable parts inside, and all maintenance must be performed
in Raycus or by qualified Raycuspersonnel. Do not try to remove covers, or electrical
shock may be caused, and warranty will be void.
