Raycus RFL-C30000XZ, Руководство пользователя

Страница: 73 / 93

Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-C30000XZ
65
8.3.4 Programming mode test area
The laser programming mode test area interface is shown in Figure 43, in which the ‘START’ button
is used to test the programming of the programming mode. This function can only run internal mode
(when external mode is turned off). Enter the current pre-tested programming number in the digital text
box and click the START button.
Figure 43 Laser programming mode test area display interface
8.3.5 Power slow rise & down parameter setting area
The interface of the laser power slow rise & fall parameter setting area is shown in Figure 44. Click
‘read parameter’ to read the power rise and fall times stored in the laser. Click ‘setting parameters’ to set
a new power rise and fall time. When the rise and fall, times are set to 0, the power slow rise & fall
function is automatically switched off. When there is no 0, the slow rise or fall function is automatically
turned on.
Figure 44 the power slow rise and fall setting area interface and measured programming.