Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus RFL-A4000D~A12000D
53
b
）
c
）
Figure 40 the power slow rise and fall setting area interface and measured programming
8.3.6
Laser output parameters read the setting area
Laser output parameter setting interface is shown in Figure 41. The output parameter setting is not
valid when AD mode is on.
Figure 41 Laser output parameter setting area display interface
8.4
Laser status display area
The display interface for laser status display area is shown in Figure 42. The module status is used to
shield the faulty module, the green light indicates the number of modules installed inside the current laser,
and the check box indicates the module that is running in the current laser.
