Rayburn Heatranger 880K, Инструкции по обслуживанию

Страница: 18 / 33

Follow instructions in sections BURNER ACCESS, Steps
1 to 3, BURNER REMOVAL Step 4.
COOKER BURNER ONLY (SEE FIG. 34)
1. Remove both HT leads from ignitor,
2. Remove mains plug from ignitor.
3. Remove earth screw.
4. Remove 2 ignitor securing screws.
5. Remove ignitor.
6. Fit new ignitor, re-assemble in reverse order.
BOILER BURNER - 880 ONLY (SEE FIG. 35)
1. Undo 2 access door fixings.
2. Remove both HT leads.
3. Remove mains plug.
4. Remove ignitor securing screws.
5. Remove ignitor.
6. Fit new ignitor, re-assemble in reverse order.
BOILER BURNER - 8120 / 8150 ONLY (SEE FIG. 36)
1. Undo 2 Philips head screws, slide out mounting
bracket.
2. Remove both HT leads.
3. Remove mains plug.
4. Remove ignitor securing screws.
5. Remove ignitor.
6. Fit new ignitor, re-assemble in reverse order.
17
Replacement of parts (Burner)
FIG. 34 DESN 514430
FIG. 35 DESN 514461
FIG. 36 DESN 514441
IGNITOR