Rayburn Heatranger 880K, Инструкции по обслуживанию

Страница: 23 / 33

SEE FIG. 42
Follow instructions in section ELECTRICAL
COMPONENT ACCESS, Steps 1 to 6.
1. Undo 2 screws on the front of the chassis which holds
the thermostat in place.
2. Remove 2 push on connectors from the back of the
thermostat. Open oven door to access the thermostat
phial which passes into the oven.
3. Replace thermostat, thermostat stat phial should be
repositioned in the same position as removed.
To complete, follow instructions in section RE-
ASSEMBLE.
SEE FIG. 43
Follow instructions in section ELECTRICAL
COMPONENT ACCESS, Steps 1 to 6.
1. Undo the central hexagon nut on the front of the
chassis which holds the thermostat in place.
2. Remove the push on connectors from back of
thermostat.
3. Replace thermostat. Take care to push thermostat
phial correctly into the pocket provided.
4. Re-connect push on connector wire as Fig. .
To complete follow the instructions in section RE-
ASSEMBLE, Steps 1 to 6.
SEE FIG. 44
Follow instructions in section ELECTRICAL
COMPONENT ACCESS, Steps 1 to 6.
1. Undo 2 screws on the front of the chassis which holds
the thermostat in place.
2. Remove 2 push on connectors from back of
thermostat.
3. Open roasting oven door to access the thermostat
phial and capillary which pass into the oven.
4. Replace thermostat. Reposition the phial in same
position as removed.
5. Re-connect push on connectors.
NOTE: Ensure phials do not make contact with oven
sides.
To complete follow instructions in section RE-
ASSEMBLE, Steps 1 to 6.
22
Replacement of parts
(Electrical controls)
FIG. 44
FIG. 42
FIG. 43
DESN 5144564
DESN 514462
DESN 514463
TO FIT NEW COOKER SAFETY
OVERHEAT THERMOSTAT
TO FIT NEW BOILER SAFETY
OVERHEAT THERMOSTAT
TO FIT NEW OVEN CONTROL
THERMOSTAT