ASSEMBLY INSTRUCTIONS
6
1.
Locate studs in the wall if applicable. Check to make sure the location you want
to install the hook doesn’t damage any electrical wires, gas pipes, water pipes or
other items within your wall.
2.
Using a level or ruler, mark a horizontal line with a pencil on the wall. The line you
make will indicate the position of the bottom of the bar mounts (A).
3.
Line up the horizontal line with the bottom end of one (1) of the bar mounts (A)
and place it against the wall. Mark the location of the holes of the bar mount on
the wall. (You should have three (3) holes marked.)
4
.
Drill three (3) holes into the wall. Then, insert the anchors (E) into the holes.
5.
Line up the holes into the wall with the holes of the bar mount (A). Then, insert
and tighten the screws (D) so the bar mount is firmly in place.
ASSEMBLY INSTRUCTIONS
A
