can be determined by turning the equipment off and on, the user is
encouraged to correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician.
Features
•
Built-in radio transceiver with integrated modem
•
Easy to use. Transmit data in = Receive data out
•
Refarming-compliant modem 9600bps in a 12.5kHz channel
•
Small sized and rugged extruded aluminum enclosure.
•
16 bit addressing for up to 65,525 different unique device addresses per channel
•
2 watts of RF output Other RF power levels available upon request.
•
Operating temperature range of –30 to +60 degrees C
•
Easily configured using “AT” commands
•
User interface is asynchronous serial data for TX, RX, and configuration.
•
RS-232 serial input and output. Programmable baud rates up to 57600.
•
Programmable over-the-air data rates for long-range or high-speed
•
Low receive and standby current consumption
•
Synthesized receive and transmit frequencies
•
SkyLine compatibility mode for use in older Sonik radio systems.
•
Automatic AGC and polarity detection of received signals.
•
Internal data buffers to allow the serial port data rate to be different than the over-the-
air data rate.
