26
12. DATA MENU
The following are brief descriptions of features available under the DATA MENU key:
DISPLAY
RATE
DATA
FEATURE and DESCRIPTION
Prn
bEGn
CONSOLE DATA PRINTOUT
Sends data through serial port to attached optional printer to print field begin
and field end pages.
ALrn
on
AUDIBLE ALARMS ON/OFF
Turns audible alarms ON or OFF for the following:
1)
Volume/Area Rate Alarm
2)
Volume/Minute Rate Fault
3)
Low Tank Fault
diSP
on
DISPLAY SMOOTHING ON/OFF
Turns display smoothing ON or OFF. Selecting display smoothing ON
means the RATE window displays target rate when actual rate is within a
percentage of target rate. The third digit of VALVE CAL determines this
percentage.
FAn
0000
FAN RPM
Displays fan RPM in DATA window
*SHFT
1oFF
LEFT SHAFT FAULT ON/OFF
Turns left shaft fault detector ON or OFF. When fault detector is selected
ON; alarm sounds and RATE display flashes "SHA1" if left shaft should be
rotating, but is not.
*SHFT
2oFF
RIGHT SHAFT FAULT ON/OFF
Turns right shaft fault detector ON or OFF. When fault detector is selected
ON; alarm sounds and RATE display flashes "SHA2" if right shaft should be
rotating, but is not.
*bin
oFF
BIN LEVEL FAULT ON/OFF
Turns bin level fault detector ON or OFF. When fault detector is selected ON;
alarm sounds and RATE display flashes "bin" if granular level drops below the
bin level sensor.
FCAL
0
FAN CALIBRATION
Displays and allows entering on fan calibration number.
rATE
on
RATE CHANGE ALARM ON/OFF
Turns rate change alarm ON or OFF. When rate change alarm is selected
ON; alarm sounds 4 long beeps when the rate 1 calibration number is
changed via the serial port using a valid change request data string.
* = GRANULAR APPLICATION ONLY
Содержание SCS 661
