PAGE 35/37 | Calibration manual | 016-8000-015EN | Rev. A1
SETUP TRACTOR PROFILE IN GARAGE | CRX + SC1 AUTOSTEERING | RAVEN
EUROPE GENERIC
101
Measure and enter the height of the
antenna.
Select the ‘
Next
’
arrow.
102
Measure and enter the antenna offset (if the
antenne is not mounted in the center).
Select the ‘
Next
’
arrow.
103
Measure and enter the distance between the
rear axle and the antenna.
Select the ‘
Next
’
arrow.
104
Measure and enter the Hitch offset from the
center (if the hitch is not in the center of the
machine).
Select the
‘
Next
’
arrow.
