CALIBRATE SC1 | CRX + SC1 AUTOSTEERING | RAVEN EUROPE GENERIC
PAGE 12/37 | Calibration manual | 016-8000-015EN | Rev. A1
Raven Industries Inc.
25
The ISO Raven Steering Controller (module
next to the seat) will now be calibrated.
First step is to enter into the system how the
module is mounted. It needs to be flat (see
installation manual), with the sticker to the
upside. In this calibration, enter which way
the connectors are pointed (in this figure,
they are pointing to the backside of the
tractor, as preferred).
Select the ‘
Next
’
arrow.
26
Drive forward. The calibration goes
automatically to the next step. If it stays in
this screen, press on the button next to
‘Vehicle Direction’. Now the calibration
goes to the next step automatically.
27
Drive 10 meters forward. After the Distance
traveled is up to 10m, the calibration
continues automatically to the next step.
28
After 10 meters is traveled, the system
continues to the Terrain Compensation
Calibration.
Nothing happens until next step is pressed.
Sel
ect the ‘
Next
’
arrow.
