CALIBRATE SC1 | CRX + SC1 AUTOSTEERING | RAVEN EUROPE GENERIC
PAGE 24/37 | Calibration manual | 016-8000-015EN | Rev. A1
Raven Industries Inc.
70
In the Wheel Control Setup it is possible to
adjust the Min and Max Wheel Velocities, the
Min should be set to around 1.0 (Deg/Sec).
Press the ‘Checkmark’.
71
Press ‘Wheel Angle Sensor’.
72
Check Wheel Angle Sensor values
Center Learning should be off, this should
only be enabled when often switching
between tractos.
Press the ‘Checkmark’.
73
Press ‘Disengage Settings’.