PAGE 13/36 |
Installation manual
|
016-8000-028EN
|
Rev. B
CRX/ ROS INSTALLATION | CRX/VIPER 4+ ROS - RS1 | RAVEN EUROPE GENERIC
HYDRAULICS
In this chapter a short overview of the hydraulic system
that needs te be installed on a tractor will be given.
1.2.1
HYDRAULIC VALVE
Figure 3 shows the manifold mounted onto a manifold
bracket with four M8 bolts. The manifold bracket is
preferably mounted at the right hand side of the
tractor (Figure 4) because this is usually the side of the
tractor with the most space.
Please note!:
Make sure the connectors of the valves and the
pressure sensor can still be connected after
mounting the manifold.
FIGURE 3 MANIFOLD BRACKET WITH A MANIFOLD
AND STEERING CONTROLLER MOUNTED
FIGURE 4 MOUNTED MANIFOLD AND HYDRAULIC
DRIVE UNIT