SBGuidance I Rev. A I IntelliSteer
Pag 18/22 I SBG-IntelliSteer-IM-EN-Rev. A
5.
Mounting DynamIQ
The following orders are presented for mounting the
DynamIQ:
ount the DynamIQ preferably on the right side of the
seat. Use the standard DynamIQ mounting plate
(Figure 14). Use M8 connecting nuts to extend the
bolts of the seat.
The DynamIQ may only be mounted lying (with the
sticker upwards) The connectors may be oriented in 4
directions (0, 90, 180, 270 degrees)
The standard installation of a DynamIQ is lying (sticker
upwards) and with the connectors to the back of the
tractor. (like in Figure 15) A different orientation must
be set in the software!
Figure 15 DynamIQ on mountingplate.
