7
Page 5
locking mechanism is the locked position before closing
the door.
5.3
Understanding the Remote Control
5.4
Synchronising the Remote Control
with the Pellet Fire
All insert fi res come with a remote-control (radio-wave)
handset and receiver. Sometimes, due to interference
in the power supply or from other electrical household
appliances (microwave ovens, satellite decoders, mobile
phones) or replacing the batteries in the remote the
connection between the fi re and the handset may be
interrupted or suffer interference. If this happens, the
following operations must be carried out to reinstate the
connection:
Note: Make sure the remote has good batteries installed.
We recommend replacing the batteries at the beginning
of each season. Batteries can be removed if the fi re is not
being used for prolonged periods, however the remote
will probably need re-synchronising once batteries are
reinstalled.
3. Switch the power to the fi re off at the mains switch.
4. Press the triangle keys 1 and 2 on the handset
together for about 3 seconds. The display will show
“SCEGLI UNITA 0”
5. Using triangle key 2, select the unit frequency to be
loaded (0 , 1 , 2 , 3 ) Note: 0 or 1 are usually the
best but different houses may work better on other
settings.
6. Switch the power to the fi re back on (the fi re must
be pushed back into its cradle when this is done) .
7. Press the red button quickly after tuning the power
on.
8. If the operation is successful, UNIT LOADED 0, 1, 2
or 3 will appear on the handset. You may now need
to turn the power to the fi re off and back on again to
refresh the connection with the remote.
5.5
Switching on the Stove
1. Ensure burn pot is clean and the burn pot holes are
visible.
2. Ensure the hopper is full of wood pellets.
3. Slide the heat exchange cleaner in and out three
times.
4. To turn unit on hold down button ‘3’ (ON/OFF)
5. Control Screen will show START.
6. To change the Power setting, fi rst press [5] then use
buttons [1] or [2] to adjust the heat output of the fi re.
7. To change the Thermostat Setting, fi rst press [4]
then use buttons [1] or [2] to adjust the thermostat
setting.
8. To turn unit off hold down button [3] for three
seconds.
9. Control Screen will show FINAL CLEANING.
18:00
20°C P-5
OFF
1
2
4
5
6
7
3
Button Number Function
1
Decrease general values
2
Increase general values
3
Turns fi re ON/OFF
4
Access to temperature adjustment
menu
5
Access to power level adjustment menu
6
Multi-function
7
Multi-function (Enter or Select)
Important: Pushing the fi re back in with the
locking mechanism closed can cause the fi re
to jam. Make sure the fi re is securely locked in
place prior to starting.
