34
Page 12
5. Set the desired day by using [1] or [2] according to
the table shown below.
6. Press [7] to confi rm
7. TIME CLOCK will appear on the display and the
current time will be shown. Change the hours of the
day with [1] or [2] (24 hour clock) example: 4:30p.m
would be 16:30
8. Press [7] to confi rm
9. MINUTES CLOCK will appear on the display.
Change the minutes of the day with buttons [1] or [2]
10. Press [7] to confi rm
11. Press [3] to exit the menu
17.3.2 Menu Three - Select Language (Setting the
Language)
Some fi res may be in their default Italian language, if so
proceed with Instruction Set ‘A’.
If not, please use Instruction Set ‘B’.
A. Setting fi re from Italian language to your desired
language. (English, German, French, Danish)
1. Press button (7) - Menu 01 “Set Orologio” will
appear.
2. Press button (1) twice until you see - Menu 03
“Scegli Lingua”.
3. Press (7) to enter into this menu - “Italiano Lingua”
should appear.
4. Press (1) or (2) until you see “English Lingua” or
select your desired language.
5. Press (3) twice to return to the main screen.
B. Setting fi re from English language to your desired
language. (Italian, German, French, Danish)
1. Press button (7) (Menu 01 “Set Clock” will appear)
2. Press button (1) twice until you see (Menu 03 “Select
Language”)
3. Press (7) to enter this menu (“English Lingua” will
appear)
4. Press (1) or (2) to change to your desired language.
5. Press (3) twice to return to the main screen.
17.3.3 Menu Four - View Settings
In this menu you can check the values of the parameters
set in the control unit. This menu is used when a Service
Technician has to understand the parameters set in
the machine, to fi nd any modifi cations to improve the
functioning of the stove.
17.3.4 Menu Five - Stove State (Fire Status)
In this menu, you can check the correct functioning of
some of the key components of the pellet fi re.
To enter this menu either
1. Press Button (7) (Menu 01 “Set Clock” will appear)
2. Then press and hold (6) for 3 seconds
Or
1. Press (7) CLOCK SETTING MENU will appear
2. Press (1) four times “fi re State” menu, enter using
(7).
This menu is for use by a service technician for
commissioning and diagnostics, and for the customer
when loading pellets into the auger when the fi re has
been completely run out of fuel.
17.3.5 Menu Six - Working Hours
The WORKING HOURS Menu shows the total run hours
done by the fi re.
To enter this menu, proceed as follows:
1. Press Buttons (7) (Menu 01 “Set Clock” will appear).
2. Press button (1) twice until you see (Menu 06
“WORKING HOURS MENU.
3. Press (7) to enter this menu .
4. Press (3) to return to the main screen.
2000
130°C
SCREW 0
STATE 1
Exhaust Fan RPM
Exhaust Temperature
Auger Status
1 = ON 0 = OFF
Stove Status
Display
Meaning
01
Monday
02
Tuesday
03
Wednesday
04
Thursday
05
Friday
06
Saturday
07
Sunday
OFF
Deactivated
