9
Page 7
day with [1] or [2] (24 hour clock) example: 4:30p.m
would be 16:30
8. Press [7] to confi rm
9. MINUTES CLOCK will appear on the display.
Change the minutes of the day with buttons [1] or [2]
10. Press [7] to confi rm
11. Press [3] to exit the menu
6.3
Menu Two - Set Crono
(Programmable Thermostat)
By using the built-in programmable thermostat you can
program your pellet fi re to turn on/off automatically on
different days of the week, with two separate on/off times.
Example: Program 1. Start at 06:00 and Stop at 08:30;
Program 2, Start at 16:00 and Stop at 22:00.
To enter this menu, proceed as follows:
1. Press button [7] (Menu 01”Set Clock” will appear)
2. Press button [1] once you see (Menu 02 Set Crono)
3. Press button [7] to enter into this menu
4. Use Button [1] or [2] to set the time you want the
fi re to start (time is in the 24 hour clock). Press [7]
to confi rm
5. Use Button [1] or [2] to set the time you want the fi re
to stop. Press [7] to confi rm.
6. Now use [5] to scroll through the days you want the
fi re to operate with this program and use [4] to set
the days to ON or OFF. Press [7] to confi rm
7. Use [1] or [2] to set the power that you want the fi re
run on (1- 5)
8. Press [7] to confi rm.
9. Use [1] or [2] to set the room temperature that you
would like the fi re to reach.
10. Press [7] to confi rm
11. Repeat steps 4 through 10 to set program 2 (if
required)
12. Once you have completed setting up program 2
Press [3] to exit
Possible Settings
6.3.1 Modifi cations of the room temperature
setting
The hand held remote that controls the fi re also has
a thermostat built in which measures the ambient
temperature. The room temperature will be shown on
the display. For the thermostat to control the pellet
fi re’s heat output, the remote must be left in a suitable
place in the room where it can measure the typical room
temperature.
P
- 3
PROG - 1
POWER
If this black line is not lit
up the timer function will
not be active. To activate
this line you must
rst
set the day and time. See
“6.2 Menu One - Setting
the Clock” on page 8.
Description
Values that can be set
START PROG -1
From OFF to 23.50 hours
STOP PROG -1
From OFF to 23.50 hours
DAY PROG -1
ON or OFF, Monday-Sunday
POWER PROG -1
From 1 to 5
TEMP ROOM PROG -1
From 7°C to 40°C
START PROG -2
From OFF to 23.50 hours
STOP PROG -2
From OFF to 23.50 hours
DAY PROG -2
ON or OFF, Monday-Sunday
POWER PROG -2
From 1 to 5
TEMP ROOM PROG -2
From 7°C to 40°C
UT06
08:30
PROGRAM 1
ST
OP
UT05
06:00
PROGRAM 1
ST
ART
Important: When using the Programmable
Thermostat mode, you must make sure that
after each time the stove is automatically
switched off, the burn pot remains clear in
order to guarantee correct automatic ignition.
A clean burn pot liner with all
the holes clearly visible
Burn pot liner needing cleaning
with holes blocked by ashes
