Use and maintenance manual for stoves with RDS technology
Pag.20
Rev.0 05/12/2022
W
H
D
D = 16.5 “ / 419 mm
W = 22.5” / 571.5 mm
H = 26” / 660.4 mm
Minimum opening for masonry and manufactured fireplace (only for pellet fireplace insert)
A
B
C
C
C
D
E
F
G
E
A) Seal the cover plate (non-combustible);
B) “L” vent flex section;
C) The smoke baffle, damper and shields may be removed if
attached with mechanical fasteners;
D) The metal sides, frame members, or other structural compo-
nents of the factory built fireplace may not be removed or altered;
E) The firebrick (refractory) may be removed;
F) The metal floor of the firebox may be removed leaving the
fireplace floor outer wrap;
G) You shall built a support for insert on raised fireplace.
