Ravel RE-127 Series, Инструкция по установке, пусконаладке и эксплуатации

Страница: 43 / 52

42
Zone Z
– Denotes the zone number who’s programmed site-
specific location shown in the repeater display screen.
To change the other indexed supervisory event zones which are
suppressed use right / left arrow keys.
Restoral: When the supervisory condition is cleared and Reset key
has been pressed after entering the user or admin password if the
zones are programmed for latching, the [RE-2554, RE-2558]panel
will perform the following:
Turn off the supervisory LEDs.
Turn off the panel buzzer.
The LCD screen of repeater panel will be as below.
This LCD Screen will replicate in the Repeater panel.
5.3.4. Fault:
The fault may any one of the following Zone fault / disable
/ earth fault, NAC fault and power section fault on the
Main/repeater panel it will replicate in the repeater panel
via RS485 communication. The repeater panel will perform
the following
Turn on the common fault LED.
Turn on the panel buzzer tone with intermittent
buzzer tone (pulse 0.5ec ON and 5sec OFF).
The LCD screen for (RE-2554, RE-2558) will be as below.
Ravel Electronics
System Healthy
Fault [ x/y ]
pn pp Type of Fault