Ravel RE-127 Series, Инструкция по установке, пусконаладке и эксплуатации

Страница: 36 / 52

35
The display showed as below. It will stay in location entering
mode to continue location entering, so to go back press ‘*’
key. Use left/Right Key to view no of Zones.
4.2.2.2.3 Panel select Mode: (For RE-127R,RE-127M)
In this mode, the panel is selected by entering the number as
no of panel connected. By entering the number 3 from panel setting
panel mode is arrived is shown below.
Pnl : 01 02 03 04 05
Mde:
E E E E E
Pressing the
LEFT/RIGHT
keys should allow you to no of panels and by
‘#’ Key the mode can change Enable / Disable the zone.
Note: Pnl:- Panel Address ; Mde :- Mode
4.2.2.2.4. View Model:
It shows the details of the panel by pressing number 4 from the Panel
setting. The LCD will show as below.
Total panels XX
Panel YY
Model No
XX – is the total number of panels connected.
YY – Panel Address
Model no - RE-120GR /RE-25AR / RE-2558/RE-2554/RE-700.
Pressing the LEFT/RIGHT keys should allow you to view the model no
scroll left and right the page you are viewing.