INSTALLATION MANUAL
–
RAVAS-
SafeLoad
19
5.9. Electronics connecting the power supply cable
3.15A fuse in
the 12 V wire
Arrange power supply from the truck
The RAVAS-SafeLoad indicator is standardly suited for 12 VDC power supplied trucks, so it can be
connected to a 12VDC power supply only. (variance 9 to 18VDC)
For trucks which have a ‘dirty’ power supply a filter is recommended. The RAVAS-SafeLoad comes
standard with an internal 12V regulator board. (art.no. EB-REG-12V12V-120MA).
Other power supply voltages from truck are available as an option. In that case the RAVAS-SafeLoad
indicator will be equipped with an
internal
power convertor EB-CON-RAVAS-SAFELOAD. This power
convertor board can be used for truck with power supplies from 24VDC up to 80VDC.
If other convertors are used the warranty of the indicator is no longer valid!